Part # UST1152
Warranty 1 Year
Dimensions 14" L x 5.5" W x 5.5" D
Century UST1152 Details
Voltage 115/230, Max Amps 115V = 18.6 230V = 9.3, Single Speed, Round Flange, RPM = 3450, Threaded Shaft, Frame = 56J Used on the following models: Hayward Max Flow, Hayward Super Pump, Hayward Super II, Hayward Northstar and Jacuzzi Magnum pumps.
Don't Forget Your Tune Up Kit
Hayward Super Pump Tune Up Kit
Hayward Super II Tune Up Kit
Hayward Max-Flo Tune Up Kit
Jacuzzi Magnum Tune Up Kit
Note: NOT California or New York Title 20 Compliant.
California and New York Title 20 Compliant Options:
I have a Hayward Supper II single speed 1 1/2 HP pump. What do I need to consider to replace the single speed motor with a dual speed motor?
Reply
Check the SF on the old and new motor. The product of the SF and HP has to match. If your old motor has a SF of 1.0, its actual HP is 1.5 (1.5 HP x 1.0 SF). If that's true you should replace it with 1 HP dual speed motor (STS1102). With a SF of 1.5, its actual HP is 1.5 (1.0 HP x 1.5 SF). Also be aware that you will have to buy a hi/lo switch. It is not provided with the motor.
Reply
My pool pump motor makes a humming noise when I try to start it. Will replacing the motor fix my problem?
Reply
Will the AO Smith UCT1152 cost less to run than the UST1152?
Reply
Yes, the UCT1152 will cost less to operate compared to the standard UST1152. Depending on how the motor is cared for, it should last several years. When replacing the motor, I would recommend buying a tune up kit based on your pump model and age.
Reply
Trying to replace Emmerson pool pump motor EUST1152, what motor should I purchase to replace this 1.5 hp motor?
Reply
I would sugget this Ao Smith / Century brand motor here which is a direct replacement for the Emerson EUST1152 motor.
Reply
1 to 2 hrs
Screwdriver, Socket Set
I shopped around and found the motor at INYO at a good price. Mostly the reason I went with INYO was the info I received from the chat person. Very helpful info and very prompt. They also told me which rebuild pump seal kit to purchase, based on the Hayward pump model number I supplied to them. This is a company I would have no hesitation to recommend.
Less than 1 hr
Screwdriver, Socket Set
4 0
I order a replacement Century motor and the experts at Inyo provided the correct replacement and parts needed. Simply unscrew the motor from the pump making a photo of where everything goes. The diagram from Inyo is clear as tap water so its easy to remove and replace the various components. Once done, re-attach it to the pump and away you go. No experience required for this repair
Less than 1 hr
Screwdriver, Nut Drivers, Socket Set, Wrench Set
4 0
I turned off the power to the pump,and disconnected the wiring to the motor.
Next the pump wet end was drained.
The 6 motor mounting bolts were removed.
The motor was removed and diffuser and impeller removed.Then the seal assembly was replaced,and the above steps were reversed for reinstallation.
1 to 2 hrs
Screwdriver, Socket Set, Wrench Set, Adjustable Wrench
4 0
Took the old motor off, which is the only 4 bolts that can be seen. And also unwired the pump. I took the motor inside because it was close to 100 degrees outside. There is still plastic parts that have to be removed from the motor and revolted to the filter box. Used a 7/16 wrench to hold the shaft while spinning the shaft off. Once that was off could remove the other bolts and then take the rest of the plastic part off. Attached it to the new pump. Bolted the plastic to the the new motor and then spun the shaft back on ( this does not need to be tightened as using the pump will tighten it). Then took the motor back outside and bolted it back to the filter box part of the pump assembly. Only thing I didn't do was change the gaskets. I did order new ones and will replace when I get them.
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Electrical tools
5 0
The motor that I had stopped working after 25 years. After doing some research I decided on this motor. The whole process took me less than 1 hour. I had to wire the cable for the electric. I’m very familiar with doing this so it was easy to do. It hooked up to the pool plumbing since it was identical to my old pump. Here’s to another 25 years of zero issues.
Less than 1 hr
Screwdriver, Socket Set, Wrench Set
4 0
This was a replacement motor for the Hayward motor that was there when we bought the house in 2011. That pump ran forever!
The install was not difficult, but did take some time to be sure we did it correctly. I HIGHLY recommend taking the time to watch the video & read the installation guide. Compare them & ask questions via chat even before you begin. Don’t rush & the install will be great!
I will say, however, that right as we were approaching the 2 year mark the impeller snapped & of course the motor stopped working. Now I am ordering a replacement that will HOPEFULLY last longer than the original.
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set
6 0
2 to 4 hrs
Screwdriver, Nut Drivers, Socket Set, Wrench Set
4 0
Removed old motor from pump by 4 bolts. Detached power supply wires from motor, and ground wire from housing. Obtained video information from INYOPools.com site. Following video instruction, disassembled all pump-related components from front of motor, including removing motor end cap to access motor spindle. Ordered new gasket kit and reinstalled pump-related components to new motor. Reattached electric wiring and reinstalled motor into pump housing unit. Motor runs well, but has small drip coming from pump impeller location, so I will need to investigate further. Outstanding and timely service by INYOPool to promptly deliver new motor.
1 to 2 hrs
Screwdriver, Socket Set, Wrench Set
4 0
Hardest part was to bypass the water connections to remove the filter from the pool. Four bolts remove the motor and part of the filter, four more separate the filter halves. and permit access to the seal parts. Replacing the seal is a matter or pulling it off and replacing it with the new seal (assuming I had the KIT 1 I had ordered and failed to arrive with the motor) Reversed all the action and removed the motor cover. Replaced the cord making sure to set the voltage selection if using the 115 voltage.
2 to 4 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
8 0
Received motor
Disassembled old motor from pool pump
Long socket wrench needed to remove 4 mounting bolts from pool pump
Remove AC wire
Remove impeller from old motor
Replace existing impeller on to New motor
Reassemble motor to pool pump
Connect AC to motor
Engage circuit
Prime pool pump
Works great
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench
4 0
I followed this video on INYO Pools - https://www.youtube.com/watch?v=mpJLp3oWDGU&feature=youtu.be
Yes I watched it several times but made it very simple. Biggest problem was removing the existing impeller. Had to take the broken pump completely apart.
Save yourself the time and buy new impeller and restrictor cover.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set
3 0
2 to 4 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
2 0
Removed and disassembled motor/impeller assembly per the Inyo Pools instructional video (well done!), with the following notes:
I could not get the impeller off by hand, and had to resort to GENTLY using a small screwdriver, inserted into one of the vane openings on the outer edge of the impeller, in order to get leverage - it worked like a charm! I used an appropriately sized socket to remove the ceramic shaft seal by gently pounding it from the opposite side of the ceramic part. Other than that, the operation went as planned!
Less than 1 hr
Screwdriver, Socket Set
2 0
First I looked on line for Companies that had our model motor and their cost! The INYO Pools were the company with best price and model for replacement! The web site was easy to use and time of delivery time as very short! I had just had back surgery so my son came over and replaced the new motor! With the model being the same the process to replace went very fast and instruction from your company very easy to follow! Would recommend this company to friends and for future use.!
Less than 1 hr
Screwdriver, Socket Set, Wrench Set
2 0
Watched the inyopools YouTube video on how to replace the motor. The video made it really easy. Took about 30 minutes from start to finish. New motor runs smooth and is a lot quieter than the old motor.
2 to 4 hrs
Screwdriver, Nut Drivers, Adjustable Wrench
2 0
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
2 0
First I tried to replace Solenoid on the old motor but when power was put to it it just smoked out ( burned ). Then went onto Lesile pool website to match Hayward motor but seeing their crazy price I searched the web and came upon INPOpools.com site and they had an AOsmith motor that would replace my Hayward exactly.
Ordered it and showed my pool store guy and he said this is a great motor and so I took the impeller apart and replaced the AOsmith motor so easily. I can't believe how much more quieter it is than the Hayward and strong 1.5 HP.
Thanks INPOpools my new pool store!
1 to 2 hrs
Screwdriver, Socket Set, Wrench Set
4 1
1) Disconnected the electric.
2) Removed the old motor from the housing.
3) Installed new seal assembly.
4) Installed impeller.
5) Installed diffuser.
6) Replace the diffuser gasket.
7) Bolted new motor to pump housing.
8) Reconnected electrical wiring.
1 to 2 hrs
Wrench Set
2 0
Upon discovery the pump was inoperable. Simple discovery motor went out. I searched and found the right pump/price. Ordered from Inyo pools and received part promptly. Removed the old motor and reinstalled the new motor. Waalaa. Pump in operation and pool open once again. Thanks Inyo Pools supply.
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set
3 0
First trip the circuit breaker, drain the water from the pump system, remove the bolts that connect the motor to the pool water pump, remove the cover at the other end of the motor.
Disconnect the three (3) electric wires from the motor, short the capacitor to ground remove the capacitor with a 1/4" nut driver, use a 7/16" open wrench to hold the motor shaft from turning.
On the other end of the motor turn the diffuser c.c. wise to remove it from the shaft, put new seals on the shaft of the new motor. Use the same diffuser that you removed from the old motor, connect the electric, put the dust cover back on and re-bolt the motor to the pump, reset the circuit breaker. your good to go.
Less than 1 hr
Screwdriver, Socket Set, Wrench Set
2 1
I order the replacement from Inyopools.
1.made sure power was off to motor
2.removed the 2 screws holding the end cap. You don't have to unscrew it all out.
3. Disconnected the 2 power leads and ground wire. Note where you removed them from.
4. Removed 4 bolts attached to pump, and slide out.
5. Remove infuser. Pull right out. Notice the label Top on the cover.
6. Remove from bolts from housing.
7. After parts are removed, clean them and check for reuse.
8. Reinstall housing in reverse order on new motor.
9. After all of the connections are made, make sure to add water to prime pump and start. Check for any leaks.
Follow the removal video from inyopool.
1 to 2 hrs
Pliers, Socket Set, Wire strippers
3 0
Less than 1 hr
Screwdriver, Pliers, Socket Set
2 0
Super simple install. Unbolted old motor, broke down seal plate as well as impeller, replaced shaft seal into seal plate and impeller then when back through the steps in reverse for the reinstall!!! Awesome replacement motor. Anybody could do it.
2 to 4 hrs
Screwdriver, Socket Set, Wrench Set
2 0
Pool motor quit working, ordered new motor, installed and still not working. Checking more found timer box had quit working. Not sure if old motor is good but saving it just in case. Pool motor working good now!!!
Took longer to do the job because of the additional troubleshooting, also made sure it is sealing right to make it prime right!! Challenging to do but once you become familiar with it, it’s easy to understand!!
Less than 1 hr
Screwdriver, Nut Drivers, Pliers, Socket Set
2 0
1 to 2 hrs
Wrench Set
4 0
1 to 2 hrs
Screwdriver, Pliers, Socket Set
3 0
I removed the old motor from the pump housing. I then removed the power cord from the old motor. I removed the cover to the new motor. I verified the new motor was set to the proper voltage which was 230V for my setup. I carefully discharges the capacitor to insure no nasty shock. I then carefully connected the old power cord to the motor and put on the cap. I bolted the new motor to the pump housing and plugged in the pump.
1 to 2 hrs
Screwdriver, Socket Set
2 0
1 to 2 hrs
Screwdriver, Nut Drivers, Pliers, Socket Set, Wrench Set, Adjustable Wrench
4 0
Best part is the pool motor arrived 2 days earlier than I was expecting. I had some questions about the accesory kit. for the installation..The support was great. I had to upload the picture of my pool motor which he reviewed and suggested the right kit.
The installation was easy once you watch the step by step DIY video provided by inyo pools.
Need to follow the video carefully to avoid leaks. Overall great experience.
Great price.Great support. Recommend highly
1 to 2 hrs
Screwdriver, Nut Drivers, Socket Set
2 0
1 to 2 hrs
Screwdriver, Nut Drivers, Wrench Set
3 0
Easy direct replacement to the Hayward Super pump. Local pool shop wanted almost 2x the cost of the motor as INYO pools. Online instructions were great, and the follow up emails on how to install the motor made this really easy.
I have replaced the motor before, but it has been over 5 years, so the refresher course/tutorial that was available was very much appreciated.
At first, I did not know how to take the company name, and decided to give them a shot. I am glad I did. I have since purchased additional parts and accessories from this company.
1 to 2 hrs
Screwdriver, Socket Set, Wrench Set
2 0
I removed the old motor, switched the impeller over to the new motor, replaced the seals, and reinstalled the new motor. The project was very easy, with the most important part being to shut off the power to the pool before disassembly.
1 to 2 hrs
Screwdriver, Pliers, Socket Set, Wrench Set
4 0
I'm still a novice at pool maintenance.
This is my 3rd summer ever owning a home with a pool.
Opened ourselves with the help of a friend who works in the field.
I have 3 pumps, Main, Spa booster and Waterfall.
The main pump was replaced last year along with a new DE filter and a couple of actuators at a cost of $2000+ by a local company a week before a big party we had planned with 50 guests coming.
After that experience I was done being robbed
This year the Spa pump was right at the end of life (loud as hell) and waterfall pump tripped breaker or would just stop after 30 minutes of run time.
There was no way I was going to go back to the local company.
My friend would have charged me a nominal fee for his time but I figured I would give it a try on my own watching the video and following advice online.
The first pump was a learning curve but the second was a breeze.
The online help and customer service at InYoPools were super helpful.
I recommend also getting a Seal Assembly kit and replace with all new when replacing the motor.
Also which is not noted in the video or article to get a SLINGER FOR the MOTOR SHAFT.
I missed that and had to reopen the first motor and did not find out until I was halfway through the install of the second motor when checking other sites online.
AND be safe everyone. turn off your power to the system before opening anything.
1 to 2 hrs
Screwdriver, Socket Set, Adjustable Wrench
5 0
I was fortunate by contacting Inyo and talking to Adam. He convinced me I could handle the replacement process and save some money. He spent time gathering the necessary information to get me the correct motor. He walked me thru the entire process and forwarded a video . I made a call back as I was unsure of the wiring . Once again Adam went over the correct setup. I am happy to report success. Because of people like Adam I will always call Inyo Pool. Your people are your most important Product!!!!!!!!
Less than 1 hr
Screwdriver, Socket Set, Wrench Set
11 0
My Haywood pool pump had quite running. When I turned it on it would only hum. Through research I determined that it was needing replaced. I found Inyopool during my online searches. Their prices were the best I found. The replacement was easy. I did order the tuneup kit, as recommended on their site. It took less than 30 minutes to install the tuneup items, and the pump. I referred to the online videos that were provided to me by Inyopool.
For the project you will need a screwdriver, a wrench (to hold the shaft in place while you tighten the impeller), and a socket set.
1. Remove your old pump, and take off the plastic housing that goes from the pump to the filter basket.
2. Clean up the pieces you will be reusing (all the plastic pieces)
3. Replace your shaft seal parts, be sure to lube the areas shown in the video
4. Now you can attach all the plastic parts onto your new pump.
5. Tighten the 4 bolts being sure to tighten each snug, before tightening all.
6. Attach your power wires, and your ground wires, put the back cover on and turn your breakers back on.
7. Final step is to refill the filter basket with water, once it is full, your new pump will be ready to roll.
Biggest recommendation is to watch the Inyopool videos. I am a female, and I was able to complete this without any problem, thanks to their step by step videos.
2 to 4 hrs
Screwdriver, Pliers, Socket Set, Adjustable Wrench
6 0
The motor was removed from the pump housing and inspected. It had locked up due to moisture from a leaking housing. A new motor and seal kit was ordered for replacement, delivery was made in 2-3 days and the repair was completed using instructional videos on the INYO website. This was my first attempt at a pump repair and everything went smoothly. Thanks to INYO for the quick delivery of parts and detailed instructions on the repair!
The Most Recent Reviews
2 0
(5 out of 5 stars) Motor
Reviewed By: Marc J. from California ()
The Company helped me in identifying the type of motor I needed. They had it in stock. I have received the motor. Thank you.
Was this review helpful to you?
2 0
(4 out of 5 stars) great pump
Reviewed By: Jeff S. from dallas, tx ()
easy to install and works great. quiet, but might get the 2 hp next time
Was this review helpful to you?
2 0
(5 out of 5 stars) Good Motor Good Price!
Reviewed By: Jaime V. from Ft Worth TX ()
Pros: Right Part Right Price
Order received in timely manner all necessary parts in box. Motor installed without a hitch.
Was this review helpful to you?
2 0
(5 out of 5 stars) Great Replacement Motor
Reviewed By: ASA'sMom ()
Pros: Great service, products, & turn around time.
After winter and gearing the pool up for summer, turned on previous pool pump after 7 years and zilch! Nothing but a hum. Husband took everything apart (handy man, no need to call a service tech) and determined it was the motor. Searched and was led to INYO. Great price, excellent installation pdf. docs provided, great service, and turn around time. Pump arrived, installed, and worked like a charm. I know where to come for all my pool supplies!!
Was this review helpful to you?
1 0
(5 out of 5 stars) Great pump
Reviewed By: G.H. from 99Arlington, Tx ()
Pros: Economical, energy efficient and very quiet
Have had this type of pump for a while and it is very quiet, works well and our electricity fbill does not seem to be affected too dramatically by the use if this pump.It is efficient and economical.
Was this review helpful to you?
(5 out of 5 stars) Exact Replacement Motor
Reviewed By: Scrunch from Austin, TX ()
Pros: Great price
Cons: None
The detailed guidance on the website allowed me to get the right motor the first time and was an exact fit.
Was this review helpful to you?
(5 out of 5 stars) Brand New -- Great price
Reviewed By: Noreen M. from Orlando, FL ()
This motor at Inyo Pools was almost $100 less than their closest competitor. Great price -- Wonderful product
Was this review helpful to you?
(5 out of 5 stars) Pump Motor
Reviewed By: Joanna C. from New Jersey ()
Pros: Price, quality, shipping
Cons: none
The product was competitively priced, was shipped and delivered quickly, and had excellent packaging,protecting the unit during shipping. Very pleased with the product and service.
Was this review helpful to you?
(5 out of 5 stars) Hayward replacement motor
Reviewed By: tomC ()
Bought because my Hayward pool pump motor is nearing it's end. Will not replace existing motor until current one dies. Am pleased that I can buy this replacement motor at a fair price and with the videos can replace it myself. I like one yr warranty or two years from manufacture.
Was this review helpful to you?
(5 out of 5 stars) Excellent Replacement Motor Best Price
Reviewed By: RonM from Hollywood, FL ()
Great motor that fit excellent. I shopped around and this was the best price I found. Would recommend this site and product to anyone.
Was this review helpful to you?
(5 out of 5 stars) A.O. Smith 1.5 pump
Reviewed By: Larry B. from Venice, FL ()
Pros: none
Cons: none
Old pump was loud and on it's last leg, searched the internet but only found it, with best price at inyopools.com. It is super quiet and works perfectly.
Was this review helpful to you?
(5 out of 5 stars) Got it in 1 Day, Sweet
Reviewed By: Jason Z. from New Jersey ()
Pros: Quick and Speedy
Cons: none
Ordered this motor and got it in less than 24 hours. A great savings over buying a whole new pump, install can be a bit tricky so do your homework.
Was this review helpful to you?
(4 out of 5 stars)
Reviewed By: Karen F. from groton ma ()
arrived quickly
Was this review helpful to you?
(5 out of 5 stars) good motor, great price
Reviewed By: poolgem ()
This was an easy purchase. The motor arrived on time. It has been running almost continuously since Spring.
Was this review helpful to you?
(5 out of 5 stars) A.O. Smith Motor
Reviewed By: Anthony S. from Utica, MI ()
Pros: Direct replacement
Cons: Motor made in China
I needed a replacement motor and this product was what I was replacing. The cost was acceptable. Motor was packed carefully and was easy to install. Everything went according to plan.
Was this review helpful to you?
(4 out of 5 stars) fast easy replacement motor
Reviewed By: David A. from San Antonio Texas ()
Pros: quality built, well marked for connection, quiet running
Cons: none
The motor was delivered on time, was easy to install and works great. The price was very competitive so I do definitely recommend INYO Pool.
Was this review helpful to you?
(5 out of 5 stars) Quiet motor
Reviewed By: bob s. from Mountain Top, PA ()
Pros: easy installation, direct fit, quiet
Cons: none
Quiet operation, direct replacement, fast delivery, best price, a good shopping experience!
Was this review helpful to you?
(5 out of 5 stars) Pump and gasket kit install
Reviewed By: Glen H. from Clanton, AL ()
Pros: Every thing needed for a successful install
Cons: I had to do the job !
Support was very helpful in making sure I had the proper pump parts for the install. I also found a YouTube video helpful in proper removal and replacement of all parts.
Was this review helpful to you?
(5 out of 5 stars) perfect fit, easy install, working well
Reviewed By: emark from Los Angeles, CA ()
Pros: arrived in great packing
arrived as scheduled, exceptionally well packed, exactly the right model for pump, everything lined up right, installation was very easy, now working well, quieter and pumping better than the original
Was this review helpful to you?
(4 out of 5 stars) 1.5 HP pool pump motor
Reviewed By: Rich M. from Blairstown, NJ ()
the pump was easy to install (about 30 minutes), fits perfectly, and runs quietly
Was this review helpful to you?
(5 out of 5 stars) better design
Reviewed By: Steven E. from broken arrow, Ok ()
Pros: quiet, easy to wire
Cons: none
this motor actually came frome centery, which I think bought out AO Smith. Very quiet, easier to wire up than old modle. My last motor was an AO SMith and went bad after 2 yrs... I think it was bad from the start because it always made a grinding sound, bad bearings.
Was this review helpful to you?
(5 out of 5 stars) Replacement Motor
Reviewed By: GARY F. from St Marys Pa ()
Pros: Excellent service
Online video really made the changing of this motor a lot easier . Took about 1 hr and was up and running with no issues . Now just need a video how to to take the three bad motors and make one good one!
Was this review helpful to you?
(5 out of 5 stars) Pool Owner
Reviewed By: David V. from Poughkeepsie, NY ()
Pros: Affordable
Cons: None
I have been using the new motor for several weeks now. It was very easy to replace and continues to run well. Will update in the near future.
Was this review helpful to you?
(5 out of 5 stars) Easy to install yourself
Reviewed By: Shawn S. from GA ()
Exactly as described. Arrived very quick. easy to install. Saved me money.
Was this review helpful to you?
(5 out of 5 stars) Best Prices
Reviewed By: Brian K. from Lumberton, NJ ()
Pros: Works like a champ.
Cons: None
Called INYO Pools for this pump. Wasn't sure exactly what I needed so I called to talk to a rep. The rep asked a few questions and told me exactly what I needed. They also had the best prices around and I had it in a day and a half with no additional shipping. Motor bolted right up and works as advertised.
Was this review helpful to you?
(5 out of 5 stars) Great pump
Reviewed By: Bruce P. from Shelbyville,KY ()
I replaced my old Hayward 1hp motor with this one. What a difference in suction! Runs much quieter too.
Was this review helpful to you?
(5 out of 5 stars) Perfect Easy Replacement Pump
Reviewed By: Edward H. from Lexington, SC ()
Perfect fit replacement pump! Fairly easy to install for a regular DIY person.
Was this review helpful to you?
(5 out of 5 stars) excellent pol pump motor
Reviewed By: David D. from Coral Springs Fl ()
The replacement pool pump motor fit perfectly and has performed excellent.My pool water was turning green before the replacement and after 1 short week after the replacement the water is cystal clear.I am very happy with the product and the service and would not hesitate to use your service again.
Was this review helpful to you?
1 0
(5 out of 5 stars) Works perfect so far
Reviewed By: jmichael from New Jersey ()
Pros: Much less expensive than the alternatives.
Cons: None other than the stripped threads.
Pump motor replacement took a little time but everything went together well and it works perfect. I would recommend buying new bolts for attaching it to the pump housing as my old bolts stripped the threads of the motor and I had to buy new bolts and tap out the threads. Other than that it was perfect and works well.
Was this review helpful to you?
(5 out of 5 stars) Great motor
Reviewed By: Kevin H. from Wv ()
The motor was just what I needed and at a great price. I hooked it up and it works great. This is a great place to deal with I got what I needed and I got it fast.
Was this review helpful to you?
1 0
(5 out of 5 stars) Easy to install
Reviewed By: Denise C. from Wilmington, Nc ()
The price was great and the step-by-step instructions were priceless. We save $300.00 doing it ourselves!! Than you Inyopool
Was this review helpful to you?
(5 out of 5 stars) Exact Match for Pool Pump Motor
Reviewed By: Doug S. from Atlanta, GA ()
Pros: Exact match; easy install, great price.
Cons: None
After determining that the bearings were bad in my pool pump, I shopped around for a replacement motor. INYOPools not only had an exact replacement for my pump motor, but also had the corresponding gasket replacement kit, and the best price. The motor matched with my pump perfectly, took no special tools to install, and with less than an hour's effort, my pump was back in operation. And, this motor seems a bit quieter than the original, which is a plus.
Was this review helpful to you?
(5 out of 5 stars) Great Price!!
Reviewed By: Ticup from Cumming, GA ()
Pros: Easy ordering
Easy ordering, fast shipping, quality product matches original! Thanks!
Was this review helpful to you?
(5 out of 5 stars) Great motor replacement!
Reviewed By: H.B. from Nashville, GA ()
Pros: Smooth, quite, & good price
Cons: none
Motor works great and very quite compared to the old motor. Great instructions and video.
Was this review helpful to you?
(5 out of 5 stars) 1.5 HP Super Pump replacement motor
Reviewed By: Alice C. from Georgia ()
This is by far the best price I have found for this replacement motor. I haven't installed and used it yet because we are awaiting a new pool liner for our pool. We are replacing our old motor in preparation for summer. I found this motor last summer for my sister's pool pump.. She was blown away at the price (was much less than the last one she purchased).. so in that respect I have already recommended this site and product to others.
Was this review helpful to you?
(5 out of 5 stars) Exact fit simple installation
Reviewed By: Pete from 44398 ()
Pros: Simple exact fit
Cons: Was not free
I'm a milwright with 25 years + exp wish all motors were like this application.
Was this review helpful to you?
(5 out of 5 stars) Painless procedure...
Reviewed By: Susan J. from Lufkin, TX ()
We ordered a new motor for our pool pump....watched the very informative video by Inyo...and had no problems installing the new one. We had a very loud motor before and were amazed at how quietly this one runs. We are very pleased with the product and with Inyopools. Made my "unhandy" hubby into a rock star. *smile* We will most assuredly continue doing business and tell all our friends how painless this was. Thank you.
Was this review helpful to you?
(5 out of 5 stars) Good service
Reviewed By: Joanne M. ()
I needed a replacement pump quickly, since mine was starting to give out. After identifying the exact part needed, this site had the best price available. Navigating the web site to order the correct replacement part was easy. Delivery was faster than I had anticipated, which was another plus. I will be shopping here frequently in the future.
Was this review helpful to you?
(5 out of 5 stars) perfect replacement
Reviewed By: Kenny M. from quakertown, pa. ()
Pros: exact replacement, great price
perfect replacement motor...exactly as described. very competitively priced...quickly delivered, in perfect shape.
Was this review helpful to you?
(5 out of 5 stars) Pump tune up
Reviewed By: Jeff A. ()
Pros: easy to do
I had the pump apart for doing the tune up kit. just added the new motor. How I have brand new, at less than 1/2 the cost
Was this review helpful to you?