Part # 5110-100
Manufacturer Code SPX3020CKIT
Closed face impeller made for the Super II pool pump by Hayward. Rated at 2.0/2.5hp, it is used in a Super II SP3000 pump body, and must be installed on a 2.0hp (or greater) C-face motor with a threaded shaft. This kit includes the diffuser.
**Note: Shaft seal - SPX1600Z2 and Impeller Ring - SPX3021R sold separately**
Currently have a SP3007X10AZ with 1HP motor, I am thinking of chaning to a 2 HP motor, would this be the correct defuser/impeller kit to do this upgrade? Also, would I still need the tune up kit or would this replace all the relevant seals?
Reply
Hi, Justin. This is not the correct upgrade kit you'll need to convert your 1hp pump to 2hp. There is not a kit available you will have to purchase the parts separately. After you verify that your system can handle the additional water flow by calculating the Feet of Head of your pool and determining the flow rate with the step provided in our How To Size an In-ground Pool Pump you'll need the following parts. The UST1202 motor, GOKIT2 tune up kit, SPX3021-B Diffuser, SPX3016-C Impeller, and the SPX3021R Impeller Ring or replace the entire pump with model number SP3015X20AZ.
Reply
Does this answer also fit the B2979 2 speed pump. The SPX3016-C Impeller says it is for a 1.5 hp, what is the correct impellerfor, the uprated hp for the B2979 is about 2.4hp.
Answered on 2/15/2017 by InyoPools Product Specialist Lennox H.
Reply
Hi. This Impeller Kit - SPX3020CKIT can be used with the Hayward Super II Pump using the B2979 motor.
Reply
I have a new Hayward Super II 2HP SP3015X20AZ Replacement Motor Kit (AO Smith UST1202 w/GO-KIT-2) ready to install in my 2005 Hayward Super II pump housing. The original impeller is pn SP3016-C and the original diffuser is pn SP3021-B. Is this SPX3920CKIT the correct parts for my pump? Will it increase this pump’s performance?
Thanks!
Reply
1 to 2 hrs
Pliers, Socket Set, Wrench Set
We have a Hayward Super II Pool Pump. We were glad to find the exact impeller that was needed for this pump. The last impeller placed on it was not the exact one needed. We are hoping this impeller will do a better job and last longer than the old one that was on it. The motor was removed first then the nuts were difficult to remove with slight corrosion from the leakage of water. After they were removed it was easy to remove the old impeller and replace it with the new one. We were excited to have the pump not leaking with a new impeller and seals with the seal kit also from INYO. Thank you for having all the parts that we needed to complete the job.
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great! Works well!
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Exactly what I needed!
Was this review helpful to you?