does this motor come with the impellers on it
Reply
Jeff- The 1 1/2 HP 2 Speed 115V Motor for JWP Pump (620032032) is just a motor and does not come with any other parts attached to it.
Reply
Do you not have the pump and motor all together in one pkg now?
Reply
Hi Mitchell, The Sta-Rite JWP pump has been discontinued and replaced by the Sta-Rite Dynamo Pump.
Reply
My pool pumps number is model JwpaS5f-2a4. Will this pump work?
Reply
Hi Teresa, This motor can work with your JWPAS5F-2A4 pump, however this one has been replaced with p/n BN50. You will also need to purchase the Dual Speed Toggle Switch (18313301) in order to operate this motor. When replacing the motor we also recommend replacing the pump shaft seal and o-ring which can be found via the Sta-Rite JWPA Series Parts.
Reply
I have a Sta Rite JWPA5YFL-A2 2 speed motor. It quit working so what's best to replace it with. It quit working. So looking to replace it at best price. Let me know thanks.
Reply
I have the JWPA5YFL-A2 motor. So can you point me in the right direction to replacing this system. But not cost me an arm and leg.
Reply
Hi Steven, The Dynamo Pump 1-1/2 HP 2 Spd. (no cord) would be a suitable replacement pump.
Reply
i have a JWPS5F7L-2A2 1.5 HP PUMP THE MOTOR IS SHOT S48B74A03 WITH A CORD DO THEY HAVE A REPLACEMENT MOTOR
Reply
I have a JWPA5FL-2A1. What will replace it?
Reply
Hi, The Sta-Rite Dynamo 1.5 HP Pump - 351230SR will replace the JWPA5FL-2A1 pump that you currently have or the BN35V1 motor will replace your existing motor if the pump housing in okay.
Reply
I have a JWPAS5F-2A4 Sta-Rite Motor for my above ground pool ... it just started making a squealing noise and my husbands thinks the bearings are going bad. What do I order?
Reply
I have a motor model K48M2 PA105 ser 1cw.
230 volts 1 1/2 hp can I use this two speed motor with a pump mdl P4EGF-1881
Reply
I have an S48B74A03 and I need a replacement motor and shaft seal.
Reply
Your replacement motor is part number BN25. In order to cross reference the correct shaft seal that you will need we will need the model name or number of the front pump housing that the motor bolts to. If you do not know that information please send images of that housing through our support request page.
Reply
Does this replace Starite JWPS5F7L-2A2 1.5HP motor #S48B74A03?
Reply
Hi Scanlon, You would require this BN25 Replacement Motor as a replacement to the S48B74A03 motor. You will also need a JWPA Shaft Seal
Reply
I have model PLM150 with one horse-power and need to replace the pump motor.
Can I upgrade to 1.5 horse-power without blowing out my filter?
It is a 27-foot above ground pool.
Thanks
Reply
Hi Tim, You could upgrade to 1.5 HP but you will need the following items assuming you have a Sta-Rite JWPA pump. The items required to upgrade to 1.5 HP are as follows: 1.5 HP Replacement Pump Motor, 1.5 HP Impeller and JWPA Seal Kit.
Reply
I have a sta-rite PLM-100 filter with a JWPA5YF7L-A1 pump, motor model C48M2A24B1, 1-1/2hp 2 speed 115v. the motor makes some noise while on low speed and the motor casing gets very warm, thinking the bearings are going along with maybe the windings. Do you have a replacement 2 speed motor that will mount to the pump/filter.
Reply
Hi Dale, you will require the BN50 1.5 HP Dual Speed Replacement Motor 115V you will also need a JWPA Seal Kit when you replace your motor.
Reply
I have a STA-RITE System 2 Filtration filter with Model JWPA5E7L-2AC, with A.O Smith motor S48B74A03. My motor is shot and I need to replace it. Is the motor model still available, and if not what is the approximate replacement ??
Hi, Clive. The entire pump is no longer available, however, replacement parts including a suitable motor are available. Use the Sta-Rite JWPA Series Pump Parts Diagram page.
Reply
Thank you for the info and you quick response.
Reply
