$9.08

Qty:

Details

Top

Part # 5056-11

Manufacturer Code O-49

Dimensions 1-15/16" ID, 1/8"

Alternate Part #'s 10-3439, 10-5857, 1013743, 1016699, 113429, 170510003, 2511984, 29-674, 29674, 30222, 350099, 351021075, 354571, 390040, 39004000, 410-511, 410278, 410511, 420045, 468240, 46824000, 47-0226-03-R, 47022603, 47022603R, 4861-112, 5126G, 568-226, 568226, 6020018, 603211C, 700-103, 722R0500035, 805-0226B, 8050226, 904231049, 92200140, FF-17-03, FF1703, O-2195, O49, SP1425Z6, SPX1425Z6, U9-226, U9226, WC20-24, 90-423-5226, AEQO49, ALDO-49-0, APCO2314, STA-101-3743

Product Description

Black rubber o-ring used most commonly as a union o-ring on pool pumps. Used for many different brand pumps including Pentair, Sta-Rite, hayward, Aqua-Flo, Vico and others.

Frequently Bought with O-ring

Magic Lube O-ring Lubricant 630

Top

?     Asked on 5/26/2015by Linda

Will this work on a ce60 body?
 Reply

A  Answered on 5/26/2015 by InyoPools Product Specialist Lennox H.

Linda, This o-ring (226) will work on your CE60 Filter inlet.
 Reply


?     Asked on 6/5/2015by Inyo Visitor

Will this fit a utilitech 1 horsepower strainer lid
 Reply

A  Answered on 6/16/2015 by InyoPools Product Specialist Lennox H.

I'm not sure if this O-ring (226) will fit your Utilitech strainer Lid, would recommend calling Utilitech or check where the pup was purchased.
 Reply


?     Asked on 7/4/2015by mary

would a wrong o-ring cause air bibbles
 Reply

A  Answered on 7/4/2015 by InyoPools Product Specialist Patrick P.

Hi Mary, Yes a wrong o-ring on the suction side of the pump would cause air bubbles. Here is a guide on Eliminating Air Bubbles in Your Pool which goes into this topic in greater detail.
 Reply


?     Asked on 1/24/2022by William Coppola

will this O ring fit a sta-rite lid 16920-11
 Reply

A  Answered on 1/24/2022 by InyoPools Product Specialist Craig C.

Hello William.  The pump lid o-ring U9-229 (5056-15) is compatible with the Sta-Rite Dura-Glas lid part number 16920-11.  Trap Cover O-ring U9-229  Attached please find an exploded parts diagram for the Sta-Rite Dura-Glas Trap.  Sta-Rite Dura-Glas
 Reply


?     Asked on 4/28/2022by bruce ewen

will this o-ring fit a hayward Filter Union Elbow that attaches to a SP710XR50 valve ?
 Reply

A  Answered on 4/28/2022 by InyoPools Product Specialist Craig C.

Hello Bruce.  The O-Ring, 2-1/4" ID is the Hayward Multiport Valve SP710XR50 Union O-Ring.  Attached please find the Hayward ProGrid Filter exploded parts diagram.  Please reference part key 29 for verification.  This o-ring is compatible with various Hayward Multiport Valves including the SP710XR50.
 Reply


Top
Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

Screwdriver, Nut Drivers, Socket Set

3     0

Jandy valve leaking

Written on 4/21/2018 by Guest

I wasn't looking forward to replacing my 30 year old Jandy valve. It would require repiping the entire system. Arghh. The o rings fit perfectly. The magic lube made the replacement easy the reassembly was almost too encouraging. I went on to replace the one rings and the impeller on the pump. Probably saved $500 on labor.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.96  out of 5 stars)
23 Rating
5 star:
 
(22)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews











Top