$10.34

Qty:

By Engineered Specialty Products


Details

Top

Part # 4727-0

Manufacturer Code 102D-204D

Dimensions 2.12" L x 2.12" W x 1.88" D

Alternate Part #'s 33600-0023T, 336000023, 72200, 80960BU, 830-4200, 8304200, 91934182R, 91934232R, E1405, EC27091, ECX27091, ECX2709A1, HAY0511859, PAC0512871, PEM1405, U23930, UTILITY 2IN BK, 17-555-1018, AMGEIPPG602-4B, AMGEIPPG6024B, IPPG6024B, SPG-06-1002

Product Description

Replacment back mount pool filter pressure gauge rated at 0 - 60 psi.  This gauge is used on many different makes and models of pool filters including Hayward Star Clear and Star Clear Plus cartridge filters, Sta-Rite System 2 and System 3, Jacuzzi Laser Sand filter, Waterway Clearwater II cartridge and DE filters, among others.

  • 0 - 60 psi
  • 1/4" NPT rear/back connection
  • Easy to read 2" face
Top

?     Asked on 10/21/2014by Vince

I have the Haywood C1100 cartridge filter and need the pressure gauge. Is this the correct part?
 Reply

A  Answered on 10/21/2014 by InyoPools Product Specialist Robert M.

Hello Vince - Part number 4727-0 is the correct pressure gauge for the Hayward C-1100.
 Reply


?     Asked on 5/8/2015by Royster

I have an Hayward EC 75 filter. I this one the correct gauge for it ?
 Reply

A  Answered on 5/8/2015 by InyoPools Product Specialist Lennox H.

Royster, This back mount pressure gauge is the correct pressure gauge for your Hayward EC75 filter.
 Reply


?     Asked on 5/18/2015by Doug

Will this guage work on a Sta Rite model S7D75 filter ?
 Reply

A  Answered on 5/18/2015 by InyoPools Product Specialist Patrick P.

Yes this is the correct pressure gauge for the Sta-Rite S7D75 Filter.
 Reply


?     Asked on 5/24/2015by Inyo Visitor

Will this gauge work on a hayward x stream cc10092a filter?
 Reply

A  Answered on 5/24/2015 by InyoPools Product Specialist Hector F.

Yes this gauge will work for this filter model.
 Reply


?     Asked on 7/24/2015by Allan

I have (I think) a Hayward C12002 filter system on my pool, the pressure gauge looks like this one but it also has two extra levers. The needle appears to be stuck and I feel I should replace the gauge. Will this one fit my filter
 Reply

A  Answered on 7/24/2015 by InyoPools Product Specialist Hector F.

Yes this gauge will work for this filter model.
 Reply


Top
Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Screwdriver

casing was cracked and old.

Written on 2/19/2023 by Guest

Unscrewed old gauge and screwed on your gauge. Could not have been easier.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Pliers, Adjustable Wrench

1     0

Old guage not reading pressure

Written on 6/21/2021 by Guest

Removed top of filter housing and removed old guage with pliers to loosen first, then adjustable wrench to unscrew. On new guage, first covered threads with thread tape, screwed on housing. Difficult part is tightening guage in housing because theres a tight space to fit a wrench between guage and housing, so finished tightening with pliers with thin jaws. Otherwise, sound repair and new working guage.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Plumbers tape

The replacement pressure gauge was not working properly.

Written on 1/17/2021 by Guest

After accidentally breaking the glass on my pressure gauge, I had replaced my pressure gauge with one from a local store. It was very difficult to read as the numbers went too high, causing them to place the numbers closer together. I replaced this while replacing a cracked filter head.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Bad Pressure Gauge

Written on 10/14/2020 by Guest

Very easy installation.
First, unscrew the old pressure gauge by hand.
Next, take new gauge and put teflon tape on threads.
Then hand turn the new gauge on. Be careful not to over tighten.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

2     0

Old Gauge Not Working

Written on 11/20/2018 by Guest

Took an adjustable wrench and removed old gauge. Put plumbing tape on the new valve and replaced.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

None

1     0

Pressure meter was broke

Written on 6/1/2018 by Guest

Removed old pressure reader, wrapped water tape around new threads screwed in the new one , easy fix

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

Less than 1 hr

Tools Needed

Adjustable Wrench

1     0

Pressure gauge broke

Written on 1/10/2018 by Guest

unscrewed the old gauge and replaced with the new one. Very easy very fast and inexpensive,

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4.66  out of 5 stars)
58 Rating
5 star:
 
(44)
4 star:
 
(10)
3 star:
 
(3)
2 star:
 
(0)
1 star:
 
(1)

The Most Recent Reviews







































Top